Free calculator
Roof pitch & triangle vent size calculator
A triangle gable vent has to match the slope of your roof. Find your roof pitch, then enter the vent's base width to get its height and the standard sizes that fit. Questions? Call 208-589-4020.
Standard sizes
| Size | Net free area | Price | Order |
|---|
What roof pitch means
Roof pitch is how many inches the roof rises for every 12 inches it runs across. A 6/12 pitch rises 6 inches for every 12 inches. We stock triangle vents from 4/12 to 12/12 and build any other pitch to order.
The top edges of a triangle gable vent follow the roof, so the vent has to be built to the same pitch as the gable it goes in.
Three ways to find your pitch
- From the gable, outside: measure the width of the gable at its base and the height from the base to the peak. Pitch = height ÷ (width ÷ 2) × 12. The calculator above does this for you.
- From a rafter, in the attic: hold a level against the bottom of a rafter, mark 12 inches along the level, and measure straight up from that mark to the rafter. That number is your pitch.
- From the plans: house plans and truss drawings list the roof pitch, often as a small triangle with 12 on one side.
Not sure? Call or text 208-589-4020 with your measurements and we'll help.
How triangle vent sizes work
Triangle sizes are width × height: the width is the base, and the height is from the base to the peak. For any pitch, height = (width ÷ 2) × (pitch ÷ 12). For example, a 48" wide vent at 6/12 is 12" tall.
Triangles over 72" wide ship in two pieces joined by a center mullion, which cuts freight cost and adds support. We also build right (half) triangles for the left or right side, and dual-pitch triangles.
Mounting a triangle vent
On pitched triangles with J-channel, the J-channel is on the bottom only, because the vent sits all the way up against the soffit in the peak and the top is usually screwed on. See all mounting options and our installation guide.
Triangle vent questions
How do I find the pitch of my gable?
Measure the gable's width at the base and its height to the peak. Divide the height by half the width, then multiply by 12. A gable 24 feet wide and 6 feet tall is 6 ÷ 12 × 12 = 6/12 pitch.
How tall is a triangle gable vent?
Height = half the width × pitch ÷ 12. A 60" wide vent is 15" tall at 6/12 and 30" tall at 12/12.
Can you build a triangle vent for an unusual pitch?
Yes. We build any pitch and any size in 1/8" steps, plus right (half) triangles and dual-pitch triangles. Price one online or call 208-589-4020.
More gable vent resources
- CalculatorAttic ventilation calculator
- ChartGable vent size & NFA chart
- GuideBuying & measuring guide
- SpecsMounting options & specs
- GuideFunctional vs. decorative louvers
- ColorsColors & samples
- GuideWhy our round vents have a smooth face
- GuideInstallation guide
- VideoHinged gable vent videos
- AllAll resources →
Ready to order your triangle vent?
Standard sizes in 4/12 to 12/12 pitch, or any size built to fit in 1/8" steps.