Family-owned in Idaho Falls since 2006 · 100% American made · Ships nationwide Call or text 208-589-4020 · Mon–Fri 9–5 MT

Free calculator

How much attic ventilation do you need?

Enter your attic's size to see how much net free area (NFA) your gable vents need, and which of our standard sizes are big enough. Questions? Call 208-589-4020.

Calculator

Does the attic also have soffit (eave) vents?

The rule: 1 square foot for every 150

Most building codes, including the International Residential Code (section R806.2), call for 1 square foot (144 square inches) of net free vent area for every 150 square feet of attic floor.

That drops to 1 for every 300 when the ventilation is balanced: 40–50% of it high in the attic, like gable vents near the peak (within 3 feet of the ridge), and the rest low at the soffits or eaves. Some cold climates also allow 1 per 300 with a vapor retarder on the warm side of the ceiling.

Your local building department has the final word, so check with them if you're not sure.

What net free area means

Net free area is the open space air can actually move through, after the louvers and the insect screen. It's always less than the vent's outside size.

Our vents have about 34% net free area for straight-sided shapes, and about 30% for round and arched shapes. Every standard size is listed in our gable vent NFA chart, and the price builder shows the NFA for any custom size.

Example: a 30 × 40 foot attic

30 × 40 = 1,200 square feet of attic floor.

  • Gable vents only: 1,200 ÷ 150 = 8 square feet, or 1,152 square inches. With a vent at each end, each one needs about 576 square inches of NFA.
  • Gable vents plus soffit vents: 1,200 ÷ 300 = 4 square feet, or 576 square inches. Half comes from the gable vents, so each one needs about 144 square inches. An 18" × 24" rectangle (about 147 square inches) at each end does it.

Tips before you order

  • Decorative vents don't count. Our non-venting (sealed back) vents look the same but let no air through, so they add no ventilation.
  • One big vent or two smaller ones: if one vent per end would be too big for the gable, split the area across more vents.
  • Ridge vents: most roofing manufacturers recommend not mixing gable vents with a ridge vent, because the ridge vent can pull air in through the gable vents instead of the soffits. Ask your roofer what's right for your roof.

Attic ventilation questions

How many square inches of ventilation does my attic need?

Divide your attic floor area (in square feet) by 150, then multiply by 144 to get square inches of net free area. If your ventilation is balanced between high vents and soffit vents, divide by 300 instead. Our calculator does the math for you.

Do decorative gable vents count toward attic ventilation?

No. Non-venting (sealed back) vents are decorative and let no air through. Only venting vents with a screened back add net free area.

What size gable vent do I need?

Divide the net free area you need from gable vents by the number of vents, then pick a size with at least that much NFA. Our NFA chart lists every standard size, and we can build any size in 1/8" steps.

Can I use gable vents with a ridge vent?

Most roofing manufacturers recommend against it, because the ridge vent can pull air in through the gable vents instead of the soffits, leaving parts of the attic without airflow. Ask your roofer or call us at 208-589-4020.

Know the size you need?

Order a standard size online, or build any size in 1/8" steps and see your price instantly.

Your cart

Your cart is empty.

Subtotal$0.00
Shipping$0.00
Total$0.00

Sales tax, if any, is added at checkout. Online orders ship to US addresses only; ordering for Canada? Call 208-589-4020.

PayPal · Venmo · Pay Later · Debit or credit card